How to Connect Your WiFi Range Extender
Follow these simple steps and your internet will reach every corner of your home!
Plug into a power socket
Put the extender in a room where your WiFi signal reaches but feels weak. The extender needs at least a little signal from your router to work properly.
Connect it to your WiFi
You can set it up using a LAN cable or wirelessly from your phone or laptop. Connect to the extender's WiFi and a setup page will open automatically. If it does not open, just type zrlogin.cn in your browser and you are good to go. No IP address needed!
Wait a few seconds
The extender will save your settings and create a new WiFi network. This only takes a few seconds. The lights on the device will tell you when it is ready.
Enjoy better WiFi everywhere!
Connect your phone, laptop, or TV to the new extended network and enjoy strong WiFi in areas that had weak or no signal before.
You do not need to type any IP address anymore. Just open any browser and go to zrlogin.cn and it will take you straight to the setup page. Simple as that!
Yes! You can set it up wirelessly as long as your main WiFi router is nearby. The extender just needs to catch at least a weak signal from your router to work.
When you order the product, you can choose to add a LAN cable during checkout. It is optional, so you decide if you want it or not.
Yes, you can open and check the box before you accept the delivery. Make sure everything looks good and nothing is broken before signing.
Yes, if the device is still not working after you have followed all the reset steps, you can return it. Just contact our customer support team and they will help you out.
Yes! We now have a 5G variant available as well. So you can choose the one that matches your router. The standard variant works on 2.4 GHz, and the new 5G variant works on 5 GHz for even faster speeds. Pick the one that suits you!
It can usually cover an extra 1000 to 1500 square feet depending on walls and furniture. For best results, place it halfway between your router and the spot with weak signal.
This extender can handle up to 15 to 20 devices at the same time. If too many devices connect together, the speed may go a little slower for everyone.
It might drop a tiny bit because the extender first receives the signal and then sends it again. But with up to 1200 Mbps capability (300 Mbps on the standard variant and 1200 Mbps on the 5G variant), you will have more than enough speed for videos, browsing, and calls on either one.
No! Once you set it up the first time, it remembers everything. Just plug it in and after a few seconds it will connect on its own automatically.
Try moving it a little closer to your router so it gets a stronger signal. Also keep it away from microwaves or cordless phones as they can cause interference. If it still keeps disconnecting, try resetting the device and setting it up again from the beginning.
